Detailed Product Description
| Models: |
MDT962B-1A, BM09DF |
Power Supply: |
AC100-230V (50 / 60Hz) |
| Signal Input: |
VIA 10 PIN EDGE |
Size: |
CRT (cathode Ray Tube) 9-inch |
9-inch Related models: MDT962B-1A, BM09DF, MDT962B-4A, MDT947, MDT947B-1A, MDT947B-2B
The products for industrial LCD monitors for updating substitute 9-inch Mitsubishi CNC system M3 M310 M520 M500 M50 E60 M64M64S C64 used in the system (MDT962B-1A, BM09DF, MDT962B-4A, MDT947, MDT947B-1A, MDT947B-2) BM09DF single amber CRT type monitor kinescope (part corresponds Mitsubishi factory model is FCUA-CT100)
OLD CRT:
Mitsubishi MDT962B-1A, BM09DF, MDT962B-4A, MDT947 Mitsubishi M64 E60 CNC machine tools display system parameters:
1, CRT (cathode ray tube) size 9-inch 90-degree view angle Neck Diameter 20mm
Color: Amber proof Standard: T-Band Standard
2, the input video signal is an analog signal (n) 0 - 2.3V
Line step way horizontal sync, TTL digital signal (positive polarity)
Step Vertical sync field, TTL digital signal (positive polarity)
3, line frequency scanning frequency field H = 24Khz frequency V == 50.5Hz
4, the level of the video display size 160mm +/- 3mm vertical 110mm +/- 3mm
5, the power AC100-230V (50 / 60Hz)
6, the signal input of the VIA 10 PIN EDGE standard connector
Original Mitsubishi MDT962B-1A, BM09DF, MDT962B-4A, MDT947 Mitsubishi M64 E60 CNC machine tool system LCD display
1, CRT (cathode ray tube)
9-inch size
View angle of 90 degrees
Neck Diameter 20mm
Color: Amber
Explosion Standard: T-Band Standard
2, the input signal
Analog video signal (n) 0 - 2.3V
Line step way horizontal sync, TTL digital signal (positive polarity)
Step Vertical sync field, TTL digital signal (positive polarity)
3, scanning frequency
Line frequency H = 24Khz
Field frequency V == 50.5Hz
4, the video display size
Horizontal 160mm +/- 3mm
Vertical 110mm +/- 3mm
5, the power supply
AC100-230V (50 / 60Hz)
6, the input signal
VIA 10 PIN EDGE standard connector
New upgrade LCD instead of OSD
Mitsubishi full interface to replace the old CRT, power and data line interface exactly the same
Like screws fixing holes, plug and play, no need to change any line, replace installed very quickly, without affecting production.
After the replacement effect:
